Anacortes, WA 98221
Request a Price
-
Daysailer
34ft
2025
335
Introducing the all new TARTAN 335 Daysailor / Weekender. HULL NO 1 Is Nearly complete and will be in Southern California
early Feb 2025! We are excited to see the final build and get out for a test sail.
Nominal Length:33.5ft
Length Overall:36.5ft
Max Bridge Clearance:52.17ft
Max Draft:6ft
Beam:10.92ft
Length at Waterline:29.17ft
Fresh Water Tanks:40
Fuel Tanks:25
Heads:1
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
HULL
NPG Isophthalic gelcoat
Modified epoxy vinylester laminating resin
Partially cored with CNC computer cut closed-cell synthetic foam coring
Locally reinforced in high-load areas
Laminated in “one shot” resin infusion process eliminating secondary bonding of structural materials
All hull penetrations made through solid E-glass laminate “core windows”
Interior surfaces painted out for aesthetics
Internal structural grid designed to carry rig and keel loads, bonded and glass-taped into hull
UL and ABS approved, corrosion free Marelon flush through hull fittings
Built to meet ABS Plan Certification
Transferrable 10-year hull structural and blister warranty
DECK
Two color deck, sand or gray non-skid, white gloss areas
CNC computer cut sealed premium coring
All deck penetrations made through solid E-glass laminate “core windows”
Molded nonskid surface on working areas
6061 T6 aluminum backing plates added at lamination for all loaded hardware
Inward-facing hull flange with integrally molded 6061 T6 aluminum bar forming a full length backing plate for hull-to-deck joint
Hull-to-deck joint fasteners, stainless steel and meet or exceed ABS standard for offshore use
Hull-to-deck joint bonded with 3M 5200 adhesive sealant
RUDDER & STEERING SYSTEM
Twin wheel carbon fiber pedestals with chain and wire rope steering system
(2) 32” stainless steel wheels
Stainless steel pedestal guard
Single-lever engine control with stainless steel handle
Lighted binnacle compass on each pedestal
High density, closed-cell foam rudder blade with reinforced skins
Tapered carbon fiber rudder post Self aligning roller rudder bearings
Gaitor rudder seal
Emergency tiller
DECK HARDWARE
(1) Harken 35.2 STC Radial (self-tailing chrome) cabin top winch
(2) Harken 40.2 STC Radial (self-tailing chrome) cockpit winches
Harken self-tacking jib traveler
24” x 1” diameter stainless steel stanchions
24” x 1” tube double stainless steel bow rail with navigation light
24” x 1” tube double stainless steel split stern rail with navigation light
1 x 19 double lifelines with port, starboard, and transom boarding gates
Stainless steel stem fitting with integral bow roller
Stainless steel 10” bow mooring cleats
Stainless steel 8” mid-ship mooring cleats
Stainless steel mid-ship chocks
Stainless steel 10” aft mooring cleats
Aluminum toe rail, teak toe rail optional
(2) Harken aluminum winch handles
Custom stainless steel mast collar with attachment points for mast-base blocks
Harken turning blocks at base of mast for leading sail controls aft to cockpit
Spinlock rope clutches on cabin top for aft led sail controls
Double ended mainsheet led aft to cockpit winches
Double ended self-tacking jib sheet led to cockpit winches
Reacher sheet blocks
Bridle mainsheet system
Harken aft lead control blocks
Companionway hatch sea hood with instrument pod
Match molded anchor locker lid with latch
Deck drains to waterline discharge, eliminates hull streaking
Stainless steel cabin top handrails
Cockpit mounted manual bilge pump
Offshore ready, match-molded and gasketed cockpit seat hatches
VENTILATION
(4) Aluminum CE approved deck hatches with screen and blind
(6) Cabin-side mounted portholes with fly screens
Lexan sliding companionway hatch with composite hatch boards and trim
ENGINE & MECHANICAL
Volvo D1-20 Approx 20hp diesel saildrive with two-blade folding propeller
(1) 12v AGM Engine starting battery
25-gallon fuel capacity in aluminum tank with remote gauge
Fuel filter/water separator
High density, foil faced engine insulation
Engine service access forward, sides, and aft
ELECTRICAL
(2) 12v AGM Group 31 batteries
30A battery charger
Polished chrome and stainless steel interior lighting fixtures with LED lights
Courtesy floor lighting
Service lighting in engine compartment and cockpit lockers
Directional reading lights at berths and main cabin settees
Directional spot lights in galley and over main cabin table
110 VAC ELCI protection
Shore power cord
110 VAC distribution panel
110 VAC outlets in each cabin with GFI protection
12 VDC metered distribution panel with 12VDC USB outlet
Battery selector switch
ABYC compliant color coded wiring throughout
Stranded, tinned, copper wiring
All wiring is chafe-protected where it passes through internal structure
Wiring bundled in PVC conduit with room for future installations
Electrical bonding system
Electric sump pump with automatic float switch for icebox and shower drains
Electric bilge pump with automatic float switch with manual override
High-water bilge alarm
USCG approved navigation lights on bow rail, stern rail, and mast
INTERIOR
Structural fiberglass timbers taped to hull to carry mast and keel loads
Structural bulkheads bonded to hull and deck
Choice of maple or cherry hardwood interior buildout
Solid stock hardwood trim throughout
Solid stock hardwood raised panel passage doors
Polished chrome, mortised door lock sets
Solid stock hardwood cabinet faces throughout
Positive lock polished chrome cabinet hardware
Solid hardwood-faced, dovetail joined, all-wood drawers throughout
Hardwood-battened overhead with strategically placed access panels
Varnished teak handrails placed for security in a seaway
Interior woodwork sprayed with satin finish, solvent and UV resistant two part conversion varnish
Varnished teak and holly cabin sole with bilge access lift outs
Ultraleather interior upholstery
ACCOMMODATIONS & STORAGE
Forward cabin with storage lockers
Approximately 78” x 60” forward berth
Furniture-grade main cabin settees and seats with contoured cushions
Maple or cherry cabinets with ventilated raised panel doors
Storage outboard of main cabin seat backs
Main cabin table folds up to mast for exceptional available floor space
Storage below berths
Cockpit seat locker port and starboard
Cockpit sole well for storage or generator installation
Aft deck lazarettes port and starboard
LPG gas bottle storage in cockpit for 11-lb tank
GALLEY & PLUMBING
Two-burner Force 10 cooktop
LPG sniffer with automatic shut off
Maple or cherry-faced cabinetry with raised panel access doors
Maple or cherry-faced, dovetailed cutlery drawers
9” deep, Granicoat, single sink with marine grade galley faucet and manual foot pump with swivel spigot
Granicoat solid surface galley countertops
Storage under galley sink through ventilated raised panel Maple or cherry doors
Built in drawer style refrigerator 12VDC
Hot and cold pressure water with service access to pump and plumbing
Polyethylene tubing and Whale mechanical fittings for freshwater plumbing
All below waterline hose connections are double-clamped with stainless steel hose clamps
Premium marine-grade hoses used throughout
40 gallons of freshwater tankage with distribution manifold
6-gallon water heater, operates on 110 VAC or engine heat exchanger
Cockpit hot and cold shower
HEAD
Manual marine head with 30-gallon holding tank
Deck pump out with vent
Low-odor premium grade marine sanitation hose
Holding tank gauge
Shower drains to sump box with automatic overboard discharge
Premium, marine-grade head faucet and shower mixer
Molded Granicoat solid surface counter top with sinkUtility storage under sink through raised panel maple or cherry door
Solid maple or cherry-faced upper vanity cabinet with storage
SPARS & RIGGING
MAST
AMP Spars, painted carbon-fiber mast with integrally molded carbon-fiber masthead
Double, tapered airfoil aluminum spreaders with machined through bars
Low friction mainsail track
1 x 19 Stainless steel wire rigging with forged turnbuckles
Internal halyards
Internal, single-line lazy jack system
Furler for self-tacking jib
Furler for masthead 155% reacher
Mast-to-deck tie rod to carry running rigging loads
Masthead anchor light
Steaming light with foredeck illuminator
Mast wiring conduit
Custom stainless steel chain plate system links to structural fiberglass grid in hull
Spartite mast sealing and chock system
Self-amalgamating mast boot tape
BOOM
AMP Spars carbon-fiber traditional boom
(2) Single line reef led aft to cabin-top winch
2:1 outhaul led aft to rope clutch and cabin top winch
Two-part boom topping lift
Rod vang with tackle led aft
RUNNING RIGGING
Polyester double-braid jib sheet, mainsheet
Polyester double-braid main traveler control lines
Cascading tackle backstay adjustment
SAILS
Fully-battened Dacron mainsail with (1) reef, Sunbrella mainsail cover
Dacron self-tacking jib
Light weight Dacron 155% (of larger reacher J dimension) masthead reacher
Factory Options
Dark hull color
Teak toe rail and taffrail
Beavertail keel (STD)
Deep fin keel (No Charge Option)
Teak cockpit table
Electric main halyard winch, Harken 35.2 STC
Leather covered wheels (2)
Teak cockpit coamings
Teak cockpit sole
1000W inverter with remote control panel
Additional 12v group 31 house battery
3 cabin fans (Forward, Mid and Aft CABINS)
Electric windlass with deck wash-down pump
Electric head
Microwave oven, installed in galley locker
Marine air reverse cycle air conditioning-1 unit
Flat screen HDTV monitor, mast mount air antenna
Raymarine Coastal Instrument Package; includes (2) i70s displays, knot/depth/temp/AWI, VHF radio, RAM mic remote VHF, Raymarine Axiom + 9 Chartplotter, Fusion AM/FM stereo with two interior and two cockpit speakers
Raymarine Offshore Instrument Package; includes (2) i70s displays, knot/depth/temp/AWI, VHF radio, RAM mic remote VHF, Raymarine Axiom + 9 Chartplotter, Raymarine below deck auto pilot with p70s display, Raymarine AIS 650 Class B Transponder, Raymarine Chirp mast mounted Radar, Fusion AM/FM stereo with two cockpit and two cabin speakers
Composite pocket boom with Sunbrella cover
Cruising spinnaker package, includes, masthead exit hardware, halyard led aft through rope clutch to house top winch, spinnaker sheet blocks mounted on aft padeyes, spinnaker sheet, adjustable tack line at bow led aft
Telescoping whisker pole with mast track, ring type car with taglines and pole topping lift led aft, stanchion mounted pole chocks
Cruising spinnaker with snuffer
DESIGN DIMENSIONSLOA ........................................................................................................................... 33 ft 6 inLWL ........................................................................................................................... 29 ft 2inBeam ..........................................................................................................................10 ft 11 inDRAFTDeep Fin ................................................................................................................... 6 ft 0 inBeavertail .................................................................................................................. 4 ft 6 inDISPLACEMENTDeep Fin ................................................................................................................... 8,500 lbBeavertail .................................................................................................................. 8,750 lbBALLASTDeep Fin ................................................................................................................... 3,400 lbBeavertail .................................................................................................................. 3,650lbCAPACITIESFuel ............................................................................................................................ 25 galWater ......................................................................................................................... 40 galAuxiliary ....................................................................................................................20 hp diesel saildriveBerths ........................................................................................................................ 2SAIL DIMENSIONSI, self-tacking jib ...................................................................................................... 42 ft 3 inJ, self-tacking jib ...................................................................................................... 12 ft 1 inI, 155% reacher ........................................................................................................ 47 ft 5 inJ, 155% reacher ........................................................................................................ 13 ft 7 inP ................................................................................................................................. 42 ft 4 inE ................................................................................................................................. 14 ft 6 inMainsail area ............................................................................................................. 306.9 sq ft100% foretriangle ....................................................................................................... 255.7 sq ftUpwind sail area (main & self-tacking jib) .................................................................. 562.6 sq ftOffwind sail area (main & reacher) ............................................................................. 806 sq ftBridge clearance (to masthead crane)......................................................................... 52 ft 2 inPERFORMANCE RATIOS (ALL FOR DEEP FIN)Ballast/displacement ratio .......................................................................................40Displacement/length ratio ..................................................................................... 153Sail area/displacement ratio (upwind) .................................................................. 21.7Sail area/displacement ratio (offwind w/reacher) .................................................31.1Designer ....................................................................................................................Tim Jackett
Seattle, WA, 98117
$190,000
Bellevue, WA, 98006
$122,000
Seattle, WA, 98102
$785,000
$189,000
Seattle, WA, 98104
Anacortes, WA, 98221
![share](data:image/svg+xml;charset=utf-8,<svg width="20" height="20" viewBox="0 0 20 20" fill="none" xmlns="http://www.w3.org/2000/svg"><path d="M3.33325 10V16.6667C3.33325 17.5871 4.07944 18.3333 4.99992 18.3333H14.9999C15.9204 18.3333 16.6666 17.5871 16.6666 16.6667V10" stroke="white" stroke-width="2" stroke-linecap="round" stroke-linejoin="round"/><path d="M13.3334 5.00001L10.0001 1.66667L6.66675 5.00001" stroke="white" stroke-width="2" stroke-linecap="round" stroke-linejoin="round"/><path d="M10 1.66667V12.5" stroke="white" stroke-width="2" stroke-linecap="round" stroke-linejoin="round"/></svg>)
