Fort Lauderdale, FL 33316
Request a Price
954-280-6218
YANMAR 3YM20
21hp
-
Cruisers
31ft
2025
Oceanis 30.1
Customizable Boat: Fort Lauderdale
The Oceanis 30.1 promises new experiences and thrills while being simple to sail and lively to helm. This robust, small, smart cruiser is trailable and offers countless opportunities for lake and river sailing as well as coastal sailing and high seas exploration.
With a stemhead, hard-chine hull, and well-proportioned sides and coachroof, the Oceanis 30.1 looks unashamedly like a small yacht. The Finot-Conq plan has met the double challenge of power and simple navigation. With her slender bow, optimized weight, and square-top mainsail, she performs well in all points of sail. For beginners or for short-handed sailing, the self-tacking jib and the single winch make her easy to handle. For performance, the Oceanis 30.1 has a large overlapping genoa, a furling code zero and an asymmetric spinnaker. Aft, a step affords access to the sea and can be supplemented by a small lifting platform.
*Please note, stock images are used. Some features depicted may not be included.
Nominal Length:31.25ft
Length Overall:31.25ft
Beam:9.83ft
Length at Waterline:28.42ft
Dry Weight:8,807Lb
Fresh Water Tanks:42.27gal
Fuel Tanks:34.34gal
Cabins:2
Heads:1
Engine Make:YANMAR
Engine Model: 3YM20
Engine Year:2023
Total Power:21hp
Engine Type:other
Fuel Type:diesel
Propeller Type:3-blade
Folding Propeller:
Shore Power Inlet:✓
Inverter:✓
Depthsounder:✓
Log-Speedometer:✓
Wind Speed and Direction:✓
Repeater(s):✓
TV Set:✓
Navigation Center:✓
Plotter:✓
Autopilot:✓
Radio:✓
Compass:✓
GPS:✓
Cockpit Speakers:✓
VHF:✓
Bow Thruster:✓
Electric Bilge Pump:✓
Oven:✓
Manual Bilge Pump:✓
Microwave Oven:✓
Marine Head:✓
Air Conditioning:✓
Electric Head:✓
Heating:✓
Hot Water:✓
Refrigerator:✓
Battery Charger:✓
Cockpit Shower:✓
Outboard Engine Brackets:✓
Radar Reflector:✓
Tender:✓
Cockpit Cushions:✓
Cockpit Table:✓
Swimming Ladder:✓
Steering Wheel:✓
Furling Mainsail:✓
Gennaker Cruising Spinnaker:✓
Asymmetric Spinnaker:✓
Furling Genoa:✓
Design in accordance with European Directive requirements and according to CE certification
• Monolithic hull design in polyester
• Monolithic contact structural counter mould (Fabrics - resin) bonded to the hull
• Fiberglass and foam sandwich contact deck - coated with "diamond point" type non-slip
• Deck hull link bonded and screwed
• Cast iron keel fixed with bolts and stainless steel backing plates
• Twin rudders hung with stainless steel stock
• White coloured hull - Grey metal hull graphics
• 2 Hull portholes
• Standard mast (Z-Diffusion) 9/10 anodized aluminum installed on the deck, 1 Set of spreader
• Anodised aluminum boom
• Discontinuous stainless steel standing rigging (Forestay- Side shrouds)
• No backstay
• 1 Standard fore stay
• 1 Rigid boom vang with tackle
• 1 Jib furler with drum on deck
• 2 Mainsail sheet padeyes
• 1 Self-tacking jib sheet track with traveller attached to the deck
• Maneuvers brought back to roof (except boom topping lift - foot)
• Complete running rigging:
• 1 Mainsail halyard
• 1 Jib halyard with cleat and mast cleat
• 1 Boom topping lift with cleat on mast
• 1 Mainsail outhaul
• 1 Mainsail sheet (bridle on the roof)
• 2 Jib sheets
• 2 Rapid reefing lines
• 5 Clutches (to port)
• 1 Self tailing winch (H20.1 STA) on the coachroof (Port)
• 1 Aluminum Harken winch handle
• 1 Winch handle box
• Classic square topped mainsail (900 mm), semi battened with slides, Natural UV protection, horizontal section
• Self-tacking Jib on a furler Dacron with UV Natural protection, horizontal section
• Lazy Jack and Lazy Bag in Natural colour
• Self-draining chain locker - Clench bolt - Hatch cover
• Single roller stainless steel bow fitting with offset roller
• 6 Aluminum mooring cleats - Stainless steel chafing plate
• Self-draining cockpit in polyester
• 1 Starboard locker (Sail locker, Life raft storage)
• 1 Single gas compartment on the port side
• 1 Gas compartment under port helmsman seat
• Natural solid wood slatted cockpit benches
• Stainless steel tiller with telescopic tiller extension
• 1 Steering compass on the roof (Starboard)
• Engine throttle and control panel on starboard
• 2 Deck access for emergency tiller
• 1 Emergency tiller
• PMMA companionway hatch and door with guillotine door and height-adjustable coaming
• Stainless steel pulpit 2 sections
• 2 Stainless steel pushpits
• 1 Lifebuoy support bracket
• Welded ring on pushpit for flag
• Double guard lines and stainless steel stanchions
• Emergency ladder on pushpit
• Tilting transom with full opening (1.80m x 0.35m / 5'11'' x 1'2'')
• Manual control opening
• Natural solid wood sole
Build To Order
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Fort Lauderdale, FL, 33316
$1,195,000
$1,117,150
$149,999
$2,500
![share](data:image/svg+xml;charset=utf-8,<svg width="20" height="20" viewBox="0 0 20 20" fill="none" xmlns="http://www.w3.org/2000/svg"><path d="M3.33325 10V16.6667C3.33325 17.5871 4.07944 18.3333 4.99992 18.3333H14.9999C15.9204 18.3333 16.6666 17.5871 16.6666 16.6667V10" stroke="white" stroke-width="2" stroke-linecap="round" stroke-linejoin="round"/><path d="M13.3334 5.00001L10.0001 1.66667L6.66675 5.00001" stroke="white" stroke-width="2" stroke-linecap="round" stroke-linejoin="round"/><path d="M10 1.66667V12.5" stroke="white" stroke-width="2" stroke-linecap="round" stroke-linejoin="round"/></svg>)
